Releasing tank filler neck

Installation Location:

Fig 1: Installation location of wing

Courtesy of PORSCHE OF NORTH AMERICA, INC.

Fig 2: Releasing tank filler neck

Courtesy of PORSCHE OF NORTH AMERICA, INC.

NOTE:

1. Press locking tabs of sleeve -A- and unclip -5- . See Fig 2.

2. Unscrew fastening screw -6- of tank filler neck -7- . See Fig 2.

3. Remove angled pipe -8- . To do this, press apart locking tabs -B- of plastic clip -9- and remove. See Fig 2.