Subsequent work for body repairs

1. Remove vehicle from the alignment bench.

2. Clean welded joints and sheetmetal flanges with a wire brush.

3. Prime flange areas with 2K primer.

4. Restore standard sealing with body sealant. Refer to 50 IN Processing structural body adhesive - as of MY 2005 (All Models) .

5. Restore standard undersealing with underbody sealant. Refer to 50 IN Processing structural body adhesive - as of MY 2005 (All Models) .

6. Paint repair area and adjacent surfaces, if necessary.

7. Install removed accessories in the repair area.

8. Apply cavity preservation.