LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2006 >> Cayman Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Hydraulic Brake System, Regulator >> 47 01 07 Bleeding the brake system - as of MY 2005 (All Models) >> Bleeding brake system >> Procedure for bleeding

Procedure for bleeding

1st. Step: Bleed brakes in the normal way (in combination with bleeding device at the brake fluid reservoir and 2.0 bar pressure) (primary circuit).

2nd. Step: In addition, use the Piwis Tester to bleed the brakes (secondary circuit). Only necessary if the hydraulic unit has been replaced and, after bleeding in the normal way (primary circuit), the brake pedal travel is excessive.

scientia non olet · About LEMON Manuals