Fastening wing to A-pillar

Installation Location: 

Fig 1: Installation location of wing

Courtesy of PORSCHE OF NORTH AMERICA, INC.

1. Install switching element for filler flap. Refer to 55 38 19 Removing and installing switching element for filler flap - as of MY 2005 (All Models) .

Fig 2: Fastening wing to A-pillar

Courtesy of PORSCHE OF NORTH AMERICA, INC.

2. Press in fastening nut -20-  . See Fig 2.

3. Position wing -19-  on the body -C-  and slide towards A-pillar -D-  . Screw in fastening screws -18-  into the A-pillar and tighten lightly. See Fig 2.