LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2006 >> Cayenne Turbo >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Wheel Suspension, Drive Shafts >> 42 58 19 Removing and installing rear-wheel bearing - as of MY 2003 (All Models) >> Tools and materials >> Tools

Tools and materials: Tools

Tools overview for wheel bearing

Fig 1: Tools overview for wheel bearing
GP00010141Courtesy of PORSCHE OF NORTH AMERICA, INC.

-A-  - Tubular piston cylinder VAS 6178 (The tubular piston cylinder is used together with the pneumatic hydraulic pump). See Fig 1.

-1-  - T10205/1 grip piece from attachments T10205 (To press the wheel hub out of the wheel bearing). See Fig 1.

-2-  - T10205/2 bell from attachments T10205 (To press out the wheel hub. To pull off the wheel bearing inner race from the wheel hub, use together with separator 12 - 115 mm ø No. 111). See Fig 1.

-3-  - T10205/3 pressure piece from attachments T10205 (To press out the wheel hub). See Fig 1.

-4-  - T10205/4 mounting from attachments T10205 (To press out the wheel bearing). See Fig 1.

-5-  - T10205/5 pipe from attachments T10205 (To press out the wheel bearing). See Fig 1.

-6-  - T10205/6 pressure disc from attachments T10205 (To press out the wheel bearing. And to press in the wheel hub). See Fig 1.

-7-  - T10205/7 pressure piece from attachments T10205 (To press in the wheel bearing). See Fig 1.

-8-1-  - T10205/8-1 threaded rod from attachments T10205 (Used in the tubular piston cylinder -A-  ). See Fig 1.

-8-2-  - T10205/8-2 threaded nut from attachments T10205 (Used on the threaded rod -8-1-  ). See Fig 1.

-9-  - T10205/9 pressure piece from attachments T10205 (To press in the wheel bearing). See Fig 1.

-10-  - T10205/10 pressure piece from attachments T10205 (To press in the wheel hub). See Fig 1.

-13-  - T10205/13 push button from attachments T10205 (Used in the tubular piston cylinder -A-  ). See Fig 1.

scientia non olet · About LEMON Manuals