Preliminary work
1. Remove lower trim panel in footwell (with diagnostic socket and footwell lighting) and the trim panel support on the bulkhead (only inserted). Refer to 70 22 19 Removing and installing cover under dashboard - as of MY 2003 (All Models) .
2. Remove lower dashboard trim panel. Refer to 70 19 19 Removing and installing trim under dashboard - as of MY 2003 (All Models) .
3. Remove side cover of dashboard (fuse box) and the lower A-pillar trim panel. Refer to 70 24 19 Removing and installing front side section trim - as of MY 2003 (All Models) . To remove the A-pillar trim panel, only partial removal of the >> trim panel for front side section << is required!