LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2006 >> Cayenne Base, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Hydraulics, Regulator, Booster >> 47 41 19 Removing and installing rear brake caliper - as of MY 2003 (All Models Except Cayenne S TIO Titan) >> Installing rear brake caliper

Installing rear brake caliper

NOTE:
  • Replace screws and lock nuts. 
  • Never use an impact bolter to loosen and tighten the brake caliper on the wheel carrier. 
  • Pay attention to tightening torques → 42 TW Tightening torques for rear axle - chapter on "Technical values". 

The brake caliper is installed in reverse order.

1. Fit the brake caliper.

2. Fit the brake line and cable holder.

3. Clip in the wear indicator connector.

scientia non olet · About LEMON Manuals