LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2006 >> Cayenne Base, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Hydraulics, Regulator, Booster >> 47 39 19 Removing and installing front brake caliper - as of MY 2003 (All Models Except Cayenne S TIO Titan) >> Installing front brake caliper

Installing front brake caliper

NOTE:
  • Replace screws and lock nuts. 
  • Never use an impact bolter to loosen and tighten the brake caliper on the wheel carrier. 
  • Observe correct tightening torques → 40 TW Tightening torques for front axle - chapter on "Technical values". 

The brake caliper is installed in reverse order.

1. Fit the brake caliper.

2. Fit the brake line to the brake caliper.

3. Clip in the wear indicator connector.

scientia non olet · About LEMON Manuals