LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2006 >> Boxster S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (40 - Front Wheel Suspension, Drive Shafts -- 987-BOXSTER-CAYMAN) >> WM 405055 Replacing Front Wheel Bearing Housing (All Models) >> Replacing Front Wheel Bearing Housing - Subsequent Work

Replacing Front Wheel Bearing Housing - Subsequent Work

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit front wheel → 440519 REMOVING AND INSTALLING WHEEL .
  2. Tighten the central nut at the wheel carrier at the side of the wheel to 460 Nm (340 ftlb.) Actuate the brake while doing this.
  3. Check wheel alignment values on front axle and adjust if necessary → WM 4400TW ADJUSTMENT VALUES FOR SUSPENSION ALIGNMENTALIGNING VEHICLE AT FRONT AND REAR .
scientia non olet · About LEMON Manuals