Installing Cover For Front Underbody

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Installation Position Of Cover For Front Underbody

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information

When sliding in the underbody cover, make sure the overlap is correct.

Insert cover for front underbody -1- .

Fig 2: Identifying Front Underbody And Cover
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Tighten fastening screws -2- Tightening torque → Final tightening: 1.5 ftlb.
Tighten fastening nuts -3- . Tightening torque → Final tightening: 0.5 ftlb.