LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2006 >> Boxster Base, Standard >> Repair and Diagnosis >> Maintenance >> Procedures >> Maintenance, Diagnostics >> 03 IN Running gear maintenance: steering gear - visual inspection of bellows and tie rod joints: - as of MY 2005 (All Models) >> Checking >> Tie rod ends: check play and dust bellows

Tie rod ends: check play and dust bellows

1. Raise the vehicle. Refer to 40 Tightening torques for front axle - as of MY 2005 (All Models) .

NOTE:
  • The rubber dust bellows and tie rods can be damaged by external influences, e. g. stone impact, or during assembly work. 
  • If a rubber dust bellow leaks, the joint or the tie rod must be replaced because any dirt or moisture that seeps in will destroy the joint. 

2. Check play and dust bellows.

3. Check dust bellows and joints are in working order and free of leaks.