| -1-
See Fig 1. |
Control mechanism for transmission |
1 |
See → 387719 Control mechanism for transmission |
| -2- |
Wire harness |
1 |
Engage wire harness in brackets and connect plug connections to solenoid valves and transmission input speed sender. |
| -3- |
O-ring |
2 |
Always replace and coat with Vaseline |
| -4- |
Screw |
1 |
Tightening torque : 6 Nm (4.5 ftlb.) |
| -5- |
Transmission input speed sender |
1 |
|
| -6- |
Spacer sleeve (20 mm) |
1 |
|
| -7- |
Screw |
1 |
Tightening torque : 6 Nm (4.5 ftlb.) |
| -8- |
Holder |
1 |
|
| -9- |
Pressure regulator 1 and O-ring |
1 |
|
| -10- |
Screw |
4 |
Tightening torque : 6 Nm (4.5 ftlb.) |
| -11- |
Holder |
2 |
|
| -12- |
Solenoid valve 1 |
1 |
Do not tighten screws for guide plate in selector lever position "P". Tightening torque : 6 Nm (4.5 ftlb.) |
| -13- |
Pressure regulator 2 and O-ring |
1 |
Thinly coat O-ring with Vaseline |
| -14- |
Pressure regulator 4 and O-ring |
1 |
Thinly coat O-ring with Vaseline |
| -15- |
Pressure regulator 3 and O-ring |
1 |
Thinly coat O-ring with Vaseline |
| -16- |
Solenoid valve 1 |
1 |
|
| -17- |
Solenoid valve 1 |
1 |
|
| -18- |
Screw |
1 |
Tightening torque : 6 Nm (4.5 ftlb.) |
| -19- |
Transmission speed sender |
1 |
|
| -20- |
Spacer sleeve (8 mm) |
1 |
|
| -21- |
Oil pipe |
1 |
|
| -22- |
O-ring |
2 |
Always replace and coat with Vaseline |