Removing oil suction pump for turbocharger

Fig 1: Bracket for oil/water heat exchanger

Courtesy of PORSCHE OF NORTH AMERICA, INC.

Fig 2: Threaded joint for oil suction pump

Courtesy of PORSCHE OF NORTH AMERICA, INC.

1. Unscrew the M6 x 40 fastening screws -1 to 6-  . The two screws -X-  must remain fitted, otherwise the oil suction pump will fall apart. See Fig 2.

2. Remove oil suction pump and seal from flange.

3. Clean sealing faces. Replace seal.