Removing steering column switch

→ Before removing steering column switch, remove ignition key.

→ When removing and installing steering column switch, the steering wheel must be pulled off in the straight-ahead position. This ensures that the airbag contact unit is locked in the central position.

→ If the setting has inadvertently changed (locking element released, airbag contact unit out of adjustment), the airbag contact unit must be adjusted as follows. → 945019 Removing and installing steering column switch - "disassembling and assembling". 

Installation Location: 

Fig 1: Overview of steering column switch

Courtesy of PORSCHE OF NORTH AMERICA, INC.

Fig 2: Pulling off plug

Courtesy of PORSCHE OF NORTH AMERICA, INC.

1. Press locking element for the electrical plug and pull off the plug.

Fig 3: Removing steering column switch

Courtesy of PORSCHE OF NORTH AMERICA, INC.

2. Loosen fastening screw and pull steering column switch downwards from the steering column.