Removing hazard warning light switch

Installation Location: 

Fig 1: Overview of hazard warning light switch

Courtesy of PORSCHE OF NORTH AMERICA, INC.

1. Switch off ignition and remove ignition key.

Fig 2: Removing hazard warning light switch

Courtesy of PORSCHE OF NORTH AMERICA, INC.

2. Reach into the opening left by the removed PCM or radio, press the two retaining clips -arrows 1-  together and remove the switch -arrow 2-  to the front. See Fig 2.

Fig 3: Removing connector

Courtesy of PORSCHE OF NORTH AMERICA, INC.

3. Press locking element of plug connection and remove connector.