LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2005 >> Boxster S, Standard >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 53 - Body Rear - BOXSTER & CAYMAN >> 53 61 55 Replacing Inner Side Section - As Of My 2006 (CAYMAN S, CAYMAN S RHD) >> Preparing Connection Areas Of The Body For Installing The Inner Side Section >> Preparing connection areas of the body for installing the rear inner side section

Preparing connection areas of the body for installing the rear inner side section

Fig 1: Cleaning the welding areas
GP00011927Courtesy of PORSCHE OF NORTH AMERICA, INC.

1. Clean undersealing, adhesive residue and paint off the body connecting flanges in the marked areas -A-  and -B-  using a hot-air gun or rotary brush. Grind the connecting flanges until bare. See Fig 1.

2. Coating spot-weld flange areas with zinc powder paint

2.1. Coat spot-weld flange areas with zinc powder paint.

scientia non olet · About LEMON Manuals