LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2005 >> Boxster S, Automatic >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Wheel Suspension, Drive Shafts >> 42 52 19 Removing and installing rear wheel bearing housing (wheel carrier) - as of MY 2005 (All Models) >> Subsequent work >> Subsequent work

Subsequent work

1. Fit rear wheel Refer to 44 05 19 Removing and installing wheel - as of MY 2005 (All Models) .

2. Tighten axle nut on drive shaft (if it was removed).

Tighten axle nut securing drive shaft to wheel hub: → Tightening torque: 460 (340 ftlb.) Nm 

scientia non olet · About LEMON Manuals