Installing heat protection cover

Installation Location: 

Fig 1: Installation position of rear wheel housing liner

Courtesy of PORSCHE OF NORTH AMERICA, INC.

Fig 2: Installing heat protection cover

Courtesy of PORSCHE OF NORTH AMERICA, INC.

1. Insert heat protection cover -3-  . See Fig 2.

2. Screw on fastening screw -1-  and tighten to tightening torque → Tightening torque: 1.5 ftlb.  . See Fig 2.

3. Screw on fastening nuts -2-  and tighten to the specified tightening torque→ Tightening torque: 1 ftlb.  . See Fig 2.