G7.2 - Phase III C - Spot Painting Into Neighboring Section
G 7.2 Phase III C - Spot Painting Into Neighboring Section
G 7.2.1 Procedure using Glasurit(R) HS 2C Topcoat solid 22 line
WARNING: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.
Step 1
Step 2
Step 3
G 7.2.2 Procedure using Glasurit(R) Basecoat metallic 55 line
WARNING: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.
Step 1
Step 2
Step 3
Step 4
G 7.2.3 Procedure using Glasurit(R) Basecoat, water-based 90 line
WARNING: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.
Step 1
Step 2
Step 3
Step 4
Step 5
G8.1 - Spot Repair