G6.2 - Phase II - Primer
G 6.2 Phase II - Primer
G 6.2.1 Priming new parts (Level I)
WARNING: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.
G 6.2.2 Priming for surface painting (Level II)
WARNING: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.
G 6.2.3 Priming for repair painting, minor/major (Level III/IV)
WARNING: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.
G6.3 - Phase III - Topcoat Finish