LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2005 >> Boxster Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (42 - Rear Wheel Suspension, Drive Shafts -- 987-BOXSTER-CAYMAN) >> WM 423819 Removing And Installing Rear-Axle Carrier Side Section (Except CAYMAN Black Edition, CAYMAN S Black Edition, BOXSTER Black Edition, BOXSTER S Black Edition, CAYMAN R) >> Information >> Installing

WM 423819 Removing And Installing Rear-Axle Carrier Side Section (Except CAYMAN Black Edition, CAYMAN S Black Edition, BOXSTER Black Edition, BOXSTER S Black Edition, CAYMAN R): Information: Installing

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Disassembled View Of Rear-Axle Carrier
G09587590Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Rear-axle carrier side section
  2. Diagonal brace
  3. Support plate
  4. Cross member
  5. Sensor
  6. Restraining cable
  7. V-brace
  1. Install rear-axle carrier side section.

    Tighten screws -3- only slightly. 

    Fig 2: Locating Rear-Axle Carrier
    G09587591Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Install cross member together with sensor.

    Tighten screws -4a- only slightly. 

    Sensor 

    Fit sensor on control arm and connect electric plug connection.

    Fig 3: Identifying Cross Member Components
    G09587592Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals