LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2005 >> Boxster Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (42 - Rear Wheel Suspension, Drive Shafts -- 987-BOXSTER-CAYMAN) >> WM 425819 Removing And Installing Rear Wheel Bearing (Except CAYMAN Black Edition, CAYMAN S Black Edition, BOXSTER Black Edition, BOXSTER S Black Edition, CAYMAN R) >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.
Location Description Type Basic value Tolerance 1 Tolerance 2
Heat up wheel bearing housing For removing and installing the wheel bearing Temperature 100°C +20°C  
Bearing cover to wheel bearing housing, M8 Please note: Do not grease threaded connections in Dacromet finish - aluminum color. Tightening torque 37 Nm (27 ftlb.)    
Brake cover plate to wheel bearing housing, M6 Please note: Do not grease threaded connections in Dacromet finish - aluminum color. Tightening torque 10 Nm (7.5 ftlb.)    
scientia non olet · About LEMON Manuals