LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2004 >> Cayenne Turbo >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Wheel Suspension, Drive Shafts >> 42 TW Tightening torques for rear axle - as of MY 2003 (All Models) >> Technical values >> Axle strut

Axle strut

Location Explanation Type Basic value Tolerance 1 Tolerance 2
Threaded connection securing front upper trailing arm to suspension subframe, M12 x 1.5 x 70 Replace screws and fastening nuts after removal. Tightening torque 67 ftlb. +90 degrees  
Threaded connection securing front upper trailing arm to wheel carrier, M14 x 1.5 x 110 Replace screws and fastening nuts after removal. Tightening torque 111 ftlb. +90 degrees  
Threaded connection securing ABS cable holder M6   Tightening torque 6 ftlb.    
Threaded connection securing top front Z-level regulator M6   Tightening torque 6 ftlb.    
Threaded connection securing top front Z-HBA on vehicle with steel springs M6   Tightening torque 6 ftlb.    
Threaded connection securing holder to suspension subframe (Z-HBA on vehicle with steel springs), M5 x 10   Tightening torque 3.25 ftlb.    
Threaded connection securing holder to suspension subframe (Z-level regulator), M5 x 10   Tightening torque 3.25 ftlb.    
Threaded connection securing rear upper trailing arm to suspension subframe, M12 x 1.5 x 70 Replace screws and fastening nuts after removal. Tightening torque 67 ftlb. +90 degrees  
Threaded connection securing rear upper trailing arm to wheel carrier, M16 x 1.5 x 110 Replace screws and fastening nuts after removal. Tightening torque 111 ftlb. +90 degrees  
Threaded connection securing lower trailing arm to front suspension subframe, M14 x 1.5 x 110 Replace screws and fastening nuts after removal. Tightening torque 111 ftlb. +90 degrees  
Threaded connection securing lower trailing arm to rear suspension subframe, M14 x 1.5 Replace screws and fastening nuts after removal. Tightening torque 133 ftlb.    
Threaded connection securing lower trailing arm to wheel carrier, M14 x 1.5 x 100 Replace screws and fastening nuts after removal. Tightening torque 111 ftlb. +90 degrees  
Threaded connection securing lower trailing arm to rear wheel carrier (spring strut + connecting rod), M12 x 1.5 x 120 Replace screws and fastening nuts after removal. Tightening torque 67 ftlb. +90 degrees  
scientia non olet · About LEMON Manuals