Damper housing
| Location | Explanation | Type | Basic value | Tolerance 1 | Tolerance 2 |
| Threaded connection securing spring damper to damper housing M8 | Tightening torque | 22 ftlb. | |||
| Threaded connection securing Z-damper housing (clip) to G-damper housing, M10 x 25 | Tightening torque | 44 ftlb. | |||
| Threaded connection securing G-damper housing to body, M12 x 1.5 x 80 | Replace screws and fastening nuts after removal. | Tightening torque | 67 ftlb. | +90 degrees |