Information - trailer hitch maintenance: check operation
NOTE:
- To perform this check, a trailer with no faults in the wiring and lights, or a trailer test cable VAS 1537 A is required.
- Please note that, if a VAS 1537 A trailer test cable is used, only vehicles with a 13-pin plug can be checked.
- The test cable can be attached to the trailer socket to locate faults. The plug has 13 pins; adapters are required for 7-pin sockets. Because of the build-up of heat, ensure that a thermal circuit breaker is used in the test cable.
| Item | Designation | Source | Explanation |
|---|---|---|---|
| Socket tester V. A. G. 1537 A | → "See Workshop Equipment Manual, Chapter 3.0" |