LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2004 >> Cayenne Base >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> 17 26 37 Disassembling and assembling oil pressure control valve - as of MY 2003 (Cayenne S TIP, Cayenne S MAN, Cayenne Turbo, Cayenne Turbo S, Cayenne S TIO Titan) >> Assembling oil pressure control valve

Assembling oil pressure control valve

Fig 1: Valve body
GP00008535Courtesy of PORSCHE OF NORTH AMERICA, INC.
NOTE:
  • Ensure that the installation opening of the oil pump housing is clean! 
  • Note the installation location of the valve body. 
  • Always replace sealing ring. 

1. Guide in the valve body with the bores into the oil pump housing first → Valve body  . See Fig 1.

NOTE:
  • Screw in the screw plug by hand against the spring pressure. 

2. Prevent the valve body from falling and screw in the spring, new sealing ring and screw plug.

Fig 2: Screw plug of oil pressure control valve
GP00008536Courtesy of PORSCHE OF NORTH AMERICA, INC.

3. Tighten screw plug (a/f 19) -arrow-  . → Tightening torque: 33 ftlb.  See Fig 2.

4. Install oil pan. → 175023 Oil pan installed (includes sealing) - chapter on "Installing" 

scientia non olet · About LEMON Manuals