17 11 19 Removing and installing oil level sensor - as of MY 2003 (Cayenne S TIP, Cayenne S MAN, Cayenne Turbo, Cayenne Turbo S, Cayenne S TIO Titan)

Fig 1: Installing the oil pressure switch

Courtesy of PORSCHE OF NORTH AMERICA, INC.

1. Install oil temperature switch with new sealing ring. → Tightening torque: 15 ftlb.  .

Fig 2: Electric connector on oil pressure switch

Courtesy of PORSCHE OF NORTH AMERICA, INC.

2. Push electric connector onto oil pressure switch. The connector must engage audibly.

3. Install front underbody panel. Refer to 10 80 19 Removing and installing engine guard - as of MY 2003 (All Models) .

4. Check oil level and correct if necessary.