Specifications on handling the optical waveguide: Notes
- The plug connections must not be connected or disconnected with tools.
- The optical waveguide and the plug copnnections must not be brought into contact with liquids such as water, leakage fluids, preservers, anti-freeze fluids or cleaning agents. This may impair the function of the MOST system or even complete system failures. Even plug connectors with connected protective caps must not be brought into contact with the listed liquids.
- If the optical contacts, plug connectors or bushings are not connected or the connectors are not equipped with protective caps, all contact with dust and other materials (lubricants) must be avoided.
- The optical contacts, plug connectors or bushings must not be cleaned.