LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2004 >> 911 GT2 >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> Front Wheel Suspension, Drive Shafts - 911 Turbo (996) >> Front-Axle Cross Member - Permissible Combinations >> Allocating the front-axle cross member to the body >> Notes

Allocating the front-axle cross member to the body: Notes

CAUTION: Material damage will result in the area of the axle mount/axle fastening due to reduced strength, if correct allocation is not observed!
  • Only install permissible combinations of front-axle cross member to the body (standard construction)!
  • Do not install front-axle cross members with one fastening screw (F1) in vehicles with two body mounting points (K2)!
scientia non olet · About LEMON Manuals