Permissible combinations

Front-axle cross member with one fastening bore -F1-  and body with one fastening point -K1-  . See Fig 1 .

Fig 1: Identifying Front-Axle Cross Member (Permissible Combination)

Courtesy of PORSCHE OF NORTH AMERICA, INC.

• Standard construction up to end model "01".

Front-axle cross member with two fastening bores -F2-  and body with two fastening points -K2-  . See Fig 2 .

Fig 2: Identifying Front-Axle Cross Member With Two Fastening Bores

Courtesy of PORSCHE OF NORTH AMERICA, INC.

• Standard construction as of model "02".