LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2004 >> 911 GT2 >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Mechanical - 911 Turbo (996) >> Installing air ducts for PCCB brake discs - GT2 >> Installing front air ducts

Installing front air ducts

  1. Mount the air duct (brake-air spoiler) on the front control arm (clip in similar to the standard air spoiler on the Carrera 996 and Turbo 996). Then insert the expansion rivet (included in the scope of delivery) into the bore present -arrow-.  In vehicles with the model year 01, the bore -arrow-  must also be drilled in the wheel housing behind (8 mm, drill through from the existing bore). Refer to Fig 1.
    Fig 1: Locating Bore In The Wheel Housing
    G03093973Courtesy of PORSCHE OF NORTH AMERICA, INC.
  2. Mount the air duct in the same manner on the other side of the vehicle.
scientia non olet · About LEMON Manuals