LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2004 >> 911 GT2 >> Repair and Diagnosis >> Brakes >> Anti-Lock Brakes >> Anti-Lock Brake System (Abs/PSM 5.7) - Diagnosis - 911 Turbo (996) >> Control module function >> Swap test

Swap test

The swap test is used to check the allocation of the brake pressure lines to the wheel brake cylinders. A hydraulic and an electrical test are carried out.

NOTE: This test must be carried out after the hydraulic unit has been exchanged.
scientia non olet · About LEMON Manuals