Fault code 2: Diagnosis/troubleshooting
DIAGNOSIS/TROUBLESHOOTING - FAULT CODE 2
| Work instruction | Display OK | If not OK | |
|---|---|---|---|
| 1 | Check fuse E3 | Step 2 | Replace fuse E3M -> End |
| 2 | Erase fault memory | Step 3 | |
| 3 | Read out fault memory | Fault code 2 is no longer presentM Step 4 |
Fault code 2 is still presentM Step 5 |
| 4 | Check function of system components | -> End | |
| 5 | Replace control module | -> End | |