LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2004 >> 911 GT2 >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seats, Diagnosis - 911 Turbo (996) >> Control unit function >> Setting the lowering angle of the passenger's rearview mirror

Setting the lowering angle of the passenger's rearview mirror

NOTE: The lowering angle of the passenger's rearview mirror can only be set using the Porsche System Tester II 9588!
  1. Connect the Porsche System Tester II 9588 with the ignition off, then switch the ignition on.
  2. Switch on the Porsche System Tester II 9588 and wait for the start-up screen.
  3. Press the ">>" key to go to the next level.
  4. Select the vehicle type 911 Turbo (996) in the left-hand window using the "v" key.
  5. Press the "-->" key to activate the right-hand window.
  6. Press the "v" key to select the Seat memory  control module and press the ">>" key to go to the next level.
  7. Press the "v" key to select Modify coding and press the ">>" key to go to the next level.
  8. Select the menu item -Lowering- using the "v" / "DOWNARROW" key.
  9. Press the ">>" key to change the coding.
  10. Adjust the lowering angle using the "v" / "DOWNARROW" key.
  11. Press "F8" (coding).
    NOTE: The lowering angle is now set!
scientia non olet · About LEMON Manuals