LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2004 >> 911 GT2 >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Exterior Lights, Lamps, Switches - 911 Turbo (996) >> Removing and installing main light switch >> Installing main light switch

Installing main light switch

  1. Engage light switch by turning it slightly in counter-clockwise direction.

    Tightening torque of the hexagon nut M16 x 1: 3.5 N.m (2.5 ftlb.) 

  2. Engage electrical plug connections and install side vent.
  3. Connect the battery and perform a function test.
scientia non olet · About LEMON Manuals