LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2004 >> 911 GT2 >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Exterior Lights, Lamps, Switches - 911 Turbo (996) >> Removing and installing bulb for additional brake light >> Removing bulb for additional brake light

Removing bulb for additional brake light

  1. Carefully lever out the right-hand corner segment of the light lens with the screwdriver blade.
  2. Pull corner segment out of the lock.
  3. Turn lock of the additional brake light approx. 90° counter-clockwise and remove.
    Fig 1: Turning Lock Of Additional Brake Light
    G03091710Courtesy of PORSCHE OF NORTH AMERICA, INC.
  4. Disconnect electrical plug connection and disengage all fastening tabs of the bulb holder.
  5. Remove bulb holder and take out defective bulb.
    Fig 2: Removing Bulb Holder And Taking Out Defective Brake Light Bulb
    G03091711Courtesy of PORSCHE OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals