Vehicle hand-over

The PCM2 control module is converted to delivery mode (low-current mode) in production. As known from other systems (alarm system, CDR23, instrument cluster, roll-over bar), the PCM2 must be activated with the Porsche System Tester II 9588.

1. Connect and start the Porsche System Tester II 9588 and switch on the ignition.
2. Select the menu item Special functions and press the ">>" key.
3. Select the menu item Vehicle hand-over and press the ">>" key.
4. Follow the instructions of the Porsche System Tester II 9588.