8004 Pcm2 - MMI: Diagnosis/troubleshooting

DIAGNOSIS/TROUBLESHOOTING (8004 PCM2 - MMI)

Work instruction			Display OK	If not OK
1	Read out PCM2 fault memory	Connect the Porsche System Tester II 9588 to the diagnostic socket, start it and switch on the ignition Select 911 Turbo (996) in the Vehicle type menu and confirm with the ">>" key Select PCM in the control modules selection and confirm with the ">>" key Select PCM2 MMI in the PCM2 function selection and confirm with the ">>" key Start Fault memory in the menu using the ">>" key Read out fault memory Erase fault memory Remove ignition key and switch on ignition again Read out fault memory Extract ambient data, press the ">>" key	-> End	Fault code is displayed Step 2
2	Replace PCM2		-> End