LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> Cayenne Turbo >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Wheel Suspension, Drive Shafts >> 42 05 19 Removing and installing rear axle housing - as of MY 2003 (All Models) >> Subsequent work >> Subsequent work

Subsequent work

1. Fit rear muffler. Refer to 26 01 19 Removing and installing exhaust system - as of MY 2003 (All Models) .

2. Fit wheels. Refer to 44 05 19 Removing and installing wheel - as of MY 2003 (All Models) .

3. To fill the level adjustment system, use the Porsche System Tester. To do this, select the Fill air suspension menu item in the Level adjustment system. Switch on level adjustment. Refer to 40 V0 Lifting the vehicle - as of MY 2003 (Cayenne Turbo S, Cayenne S TIO Titan) or 40 V0 Lifting the vehicle - as of MY 2003 (Cayenne TIP, Cayenne MAN, Cayenne S TIP, Cayenne S MAN, Cayenne Turbo) .

4. Perform suspension alignment. Refer to 44 IN Suspension alignment, complete - as of MY 2003 (All Models) and calibrate. Refer to 45 60 05 Initializing and calibrating steering angle sensor - as of MY 2003 (All Models) .