LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> Cayenne Turbo >> Repair and Diagnosis >> Engine Performance >> Ignition System >> 28 39 19 Removing and installing hall sender - as of MY 2003 (Cayenne S TIP, Cayenne S MAN, Cayenne Turbo, Cayenne Turbo S, Cayenne S TIO Titan) >> Installing hall sender >> Installing hall sender

Installing hall sender

Fig 1: Fastening screw on hall sender
GP00009282Courtesy of PORSCHE OF NORTH AMERICA, INC.

1. Push the hall sender into the camshaft housing and tighten the fastening screw. → Tightening torque: 7.5 ftlb. 

2. Push on electric connector. The connector must engage audibly.

scientia non olet · About LEMON Manuals