| Location |
Explanation |
Type |
Basic value |
Tolerance 1 |
Tolerance 2 |
| Brake pressure line to brake master cylinder, brake hose, distributor, brake caliper and hydraulic unit |
Thread M10/M12 |
Tightening torque |
10.5 ftlb. |
+/-0.5 ftlb. |
|
| Mount for hydraulic unit support |
Thread M6 x 10 |
Tightening torque |
7.5 ftlb. |
|
|
| Mount for intermediate piece |
Thread M6 x 14 |
Tightening torque |
7.5 ftlb. |
|
|
| Brake caliper to wheel carrier front axle |
Thread M16 x 1.5 x 48 x 33 (Replace screws and lock nuts after each removal.) |
Tightening torque |
200 ftlb. |
|
|
| Brake caliper to wheel carrier rear axle |
Thread M14 x 1.5 x 40 (Replace screws and lock nuts after each removal.) |
Tightening torque |
133 ftlb. |
|
|
| Connecting line to brake caliper |
Thread M10 x 1 |
Tightening torque |
9.5 ftlb. |
+/-0.5 ftlb. |
|
| Bleeder screw on brake caliper |
Thread M10 x 1 |
Tightening torque |
10.5 ftlb. |
+/-1.5 ftlb. |
|
| Brake pressure line to brake caliper |
Thread M10 x 1 |
Tightening torque |
10.5 ftlb. |
+/-0.5 ftlb. |
|
| Cap screws for brake lines |
Thread M10 x 1 |
Tightening torque |
10.5 ftlb. |
+/-0.5 ftlb. |
|
| Brake booster |
Thread M8 |
Tightening torque |
19 ftlb. |
+/-2 ftlb. |
|
| Brake booster to brake master cylinder |
M8 thread |
Tightening torque |
19 ftlb. |
+/-3 ftlb. |
|