Possible causes, elimination, Notes
- Pull off plug I on the alarm control module.
- Check the central locking button.
- Voltmeter at plug I pin 10 and ground.
Central locking button not actuated.
Display: 0 V
Central locking button actuated towards "Open".
Display: Battery voltage
- Voltmeter at plug I pin 10 and ground.
- Disconnect the plug connection at the central locking button.
- Check the lead from the alarm control module to the central locking button for short to B+.
- Voltmeter at plug I pin 10 and ground.
Display: 0 V
- Voltmeter at plug I pin 10 and ground.