Fault overview: Notes
FAULT OVERVIEW - SYSTEM I 16
| Test point | Fault code | Fault effect |
|---|---|---|
| Test point 1 | 01 | - |
| Test point 2 | 02 | - |
| Test point 3 | 03 | - |
| Test point 4 | 04 | Central locking not possible |
| Test point 5 | 05 | Central unlocking not possible |
| Test point 6 | 06 | Central locking or unlocking not possible |
| Test point 7 | 07 | Same as for test point 4 |
| Test point 8 | 08 | Same as for test point 5 |
| Test point 9 | 09 | Same as for test point 6 |
| Test point 10 | 10 | Alarm system/central locking No function |
| Test point 11 | 11 | Interruption of alarm output |
| Test point 12 | 12 | - |
| Test point 13 | 13 | - |
| Test point 14 | 14 | - |
| Test point 15 | 15 | No function |
| Test point 16 | 16 | Doors not unlocked in case of accident |
| Test point 17 | 17 | Same as for Test point 16 |
| Test point 18 | 18 | Power window control does not function |
| Test point 19 | 19 | Engine cannot be started |
| Test point 20 | 20 | Same as for test point 19 |
| Test point 21 | 21 | Same as for test point 19 |
| Test point 22 | 22 | No passenger compartment monitoring |
| Test point 23 | 23 | - |
| Test point 24 | 24 | Engine cannot be started |
| Test point 25 | 25 | - |
| Test point 26 | 26 | - |
| Test point 27 | 27 | - |
| Test point 28 | 28 | - |
| Test point 29 | 29 | - |
| Test point 30 | 30 | - |
| Test point 31 | 31 | Engine cannot be started |
| Test point 32 | 32 | No passenger compartment monitoring |
| Test point 33 | 33 | Same as for Test point 32 |
| Test point 34 | 34 | Same as for test point 32 |
| Test point 35 | 35 | Same as for Test point 32 |
| Test point 36 | 36 | Same as for Test point 32 |
| Test point 37 | 37 | Same as for Test point 32 |
| Test point 38 | 39 | Engine cannot be started |
| Test point 39 | 40 | Same as for Test point 38 |
| Test point 40 | 41 | Same as for Test point 38 |
| Test point 41 | 42 | Same as for Test point 38 |
| Test point 42 | 43 | - |
| Test point 43 | 44 | - |
| Test point 44 | 45 | Central locking or unlocking not possible |
NOTE:
The frequency counter is set to 1 the first time a fault occurs. At every changeover from not present to present, the counter is increased by 1.
NOTE:
After a fault occurs at the alarm system and is remedied, the fault memory must be cleared.