Test adapter mounting instructions
WARNING: This page is about a different variant/trim than selected.
The test adapter 9616 must be used for all tests on electrical wiring (e.g. convertible-top control module connectors/micro-switches/potentiometers).
It does not damage the plug-in (miniature) contacts and facilitates location of the individual pins.
Use test adapter 9636 in conjunction with test adapter 9616 and pin template 9636.
Disconnect the vehicle wiring harness from the convertible-top control module.
Connect test adapter 9636 to the convertible-top control module and the vehicle wiring harness.
Connect the 88-pole connector of test adapter 9636 to test adapter 9616 . Lay pin template 9636 . on top of test adapter 9616 .