LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Turbo, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 25 (Brakes - Hydraulic - 911 CARRERA (996)) >> Removing and installing brake booster >> Replacing brake booster >> In the case of replacement >> Variant A: First version (spare parts not included)

Variant A: First version (spare parts not included)

WARNING: This page is about a different variant/trim than selected.
Fig 1: Identifying Rubber Bellows On Brake Booster - First Version
G03105903Courtesy of PORSCHE OF NORTH AMERICA, INC.

The 2 rubber bellows -1 and 2-  on the brake booster and on the body are no longer available for vehicles with bellows variant A (first version).

For assembly work in this area, the 2 rubber bellows -1 and 2-  and the grommet (rubber groove ring) -3-  must be removed and the spare variant A1 must be installed in its place.

scientia non olet · About LEMON Manuals