LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Turbo, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Exterior Lights, Lamps, Switches - 911 CARRERA (996)) >> Removing and installing bulb for additional brake light >> Removal

Removing and installing bulb for additional brake light: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Carefully lever out the right-hand corner segment of the light lens with the screwdriver blade. Pull corner segment out of the lock.
  2. Turn lock of the additional brake light approx. 90° counterclockwise and remove.
  3. Disconnect electrical plug connection and disengage all fastening tabs of the bulb holder.
  4. Fig 1: Turning & Removing Lock Of Brake Light & Disengaging Fastening Tabs Of Bulb Holder
    G03063641Courtesy of PORSCHE OF NORTH AMERICA, INC.
  5. Remove bulb holder and take out defective bulb.