Connector assignment
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
CONNECTOR PIN DESIGNATION - HBA CONTROL MODULE
| Pin | Designation |
|---|---|
| 1 | Stepper motor, left |
| 2 | Stepper motor, left |
| 3 | Stepper motor, left |
| 4 | Stepper motor, left |
| 5 | Stepper motor, right |
| 6 | Stepper motor, right |
| 7 | Stepper motor, right |
| 8 | Stepper motor, right |
| 9 | Diagnosis |
| 10 | Terminal 58 (parking light) |
| 11 | Wheel speed signal |
| 12 | Angle sensor for HBA (signal wire), front |
| 13 | Angle sensor for HBA (signal wire), rear |
| 14 | +5V supply for angle sensors |
| 15 | Terminal 56A (high beam) |
| 16 | Terminal 15 (ignition) |
| 17 | Ground for angle sensors |
| 18 | Terminal 31 (ground for control module) |