LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Turbo, Automatic >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> General Information - 911 Turbo (996) >> 911 Turbo (996) >> Brakes

911 Turbo (996): Brakes

GENERAL SPECIFICATION - BRAKES (1 Of 2)

Operating brake Foot operated, hydraulic-mechanical boost, dual-circuit brake system, 4-piston Al monoblock brake calipers at FA and RA, distributed per axle, internally ventilated brake discs at front and rear axles.  
Vacuum brake booster (boost factor) 3.85  
Brake master cylinder 25.4(1.00) mm (in)
Brake master cylinder stroke 18/18(0.71/0.71) mm (in)
Brake discs front 330 (13.00) mm (in)
rear 330 (13.00) mm (in)
Effective brake disc front 134(5.28) mm (in)
rear 136 (5.36) mm (in)
Brake disc thickness front 34 (1.34) mm (in)
rear 28 (1.10) mm (in)
Effective total brake pad area per wheel front 157(24.34) cm2 (sq.in)
rear 127 (19.69) cm2 (sq.in)
GENERAL SPECIFICATION - BRAKES (2 Of 2)

Piston in brake caliper front 36 (1.42) and 44 (1.73) mm (in)
rear 28 (1.10) and 30 (1.18) mm (in)
Parking brake Drum-type parking brake  
Brake drum 180(7.092) mm (in)
Brake shoe width 25 (0.985) mm (in)
Lining area per wheel 85(13.08) cm2(sq.in)
Running gear control systems Standard Porsche Stability Management (PSM) with ABS, Traction Control (TC), ABD, MSR (engine drag torque control), FZR (vehicle regulator) and EBV (electronic brake distributor). Passive switching possibility for TC, FZR and MSR.