Drive shaft/stabilizer
DRIVE SHAFT/STABILIZER TIGHTENING TORQUES SPECIFICATION
| Location | Thread | Tightening torque Nm (ft.lb) |
|---|---|---|
| Drive shaft | ||
| to transmission | M10 | 81 (60) |
| to wheel hub | M22 x 1.5 | 460 (340) |
| Stabilizer to carrier side section | M8 | 23 (17) |
| Stabilizer mount to stabilizer and spring strut | ||
| Turbo | M10 | 46 (34) |
| 911 GT2 | M10/10. | 65 (48) |
| 911 GT2 | ||
| Stabilizer mating bearing to spring strut (lock nut) | M52 x 1.5 | 50 (37) |