Technical data - Turbo with ceramic brake discs (PCCB)

BRAKE WEAR LIMIT TECHNICAL DATA - TURBO WITH CERAMIC BRAKE DISCS (PCCB)

Designation

Notes, dimensions

Operating brake (foot brake) with ceramic brake discs (special request)

Hydraulic dual-circuit brake system with front-axle / rear-axle brake-circuit distribution. Vacuum brake booster, internally ventilated and perforated ceramic brake discs with six-piston monobloc fixed caliper on the front axle and four-piston on the rear axle.⁽¹⁾

The brake calipers are painted yellow for visual differentiation.⁽¹⁾

PSM⁽¹⁾

Brake booster (vacuum)

10 inch

Boost ratio

3,85

Brake master cylinder

front

25.4 mm

rear

25.4 mm

Stroke

18/18 mm

Brake proportioning control⁽²⁾

EBV⁽²⁾

Brake discs

front

350 mm (PCCB)

rear

350 mm (PCCB)

Effective brake discs

front

284 mm

rear

291 mm

Piston in brake caliper

front

2 x 38 mm

6-piston

2 x 32 mm

2 x 28 mm

rear

2 x 30 + 2 x 28 mm

4-piston

Brake pad area

front

448 cm²

rear

248 cm²

Total brake pad area

696 cm²

⁽¹⁾	Porsche Stability Management (PSM) standard with ABS, Traction Control (TC), ABD, MSR (engine drag torque control), FZR (vehicle regulator) and EBV (electronic brake distributor). Passive switching possibility for TC, FZR and MSR.

⁽²⁾	EBV = electronic brake distributor (brake proportioning control). As a result, no screw-in brake proportioning valves are required!